Views: 0 Author: Site Editor Publish Time: 2022-06-02 Origin: Site
The foundation drilling induction welding machine is a six-station rotary induction welding foundation drilling welding equipment, each station has a set of tire clamps, and the rotary table can complete the welding of 6 drill bit steel bodies and composite sheets by one rotation. Due to the different types of drill bits, the PDC welding position is divided into different degrees, both 180° and 120°. The specifications vary widely, and the number of welds is different. According to different index classifications, the design is completed by two sets of induction welding equipment. So what is the information about foundation drilling welding? Let's take a look at it next.
Here is the content list:
l The working process of induction welding equipment
l The composition of foundation drilling induction welding machine
l Rotary stepper drive
The eight stations are ①foundation drilling steel body installation station; ②composite cutter head installation station; ③welding and pressing station; ④slow heat preservation station; ⑤cooling station one; ⑥cooling station two; ⑦ Cooling station three; ⑧ unloading station.
The working process of induction welding equipment is as follows:
①The tire clamp is pneumatically clamped, the steel body of the drill is positioned, and the solder is placed manually to apply the flux; the rotary table rotates the workpiece at the set time (set by the controller) and moves to the station with the tire clamp.
②At this time, manually place the foundation drilling fixture to position the cutter head at the correct welding position; the rotary table continues to rotate the steel body of the drill bit to the station.
③Press down the pneumatic indenter, apply the required pressure to the Flat teeth for foundation drilling, the tire clamp cutter head positioning system is withdrawn, the high-frequency induction welding head is in place, and the welding starts. After the welding is completed, the pneumatic indenter is raised, and the drill bit is the body rotates with the workpiece table, and reaches the station through slow heat preservation and cooling successively, and the welded drill workpiece is unloaded.
The foundation drilling induction welding machine tool is mainly composed of a rotary stepping drive device, a frame, and a column, a high-frequency welding machine for welding tire fixtures and a component motion system, a Barrel Cutter Bits pneumatic pressure head, and a component motion system, a rotary air distribution system, a cooling system, and control system, etc.
The heavy drilling bit for the foundation device is driven by a servo motor through a transmission mechanism to drive the turntable on the splitter to achieve step-by-step motion. An electromagnetic clutch and a brake are provided on the input shaft of the reducer, and a non-contact switch is provided on the input shaft of the foundation drilling splitter. When the splitter rotates to the splitting angle (270°), the non-contact switch sends a signal, the clutch is opened, the brake works, the splitter stops rotating, and the stop time is set by the PLC in the control system. The time is the stopping time of each station, that is, the welding time of the drill bit. When the stop time is up, the clutch is closed, and the splitter is driven to the next step.
RUIAN FLY MACHINE PARTS CO., LTD was established in 2006. After 15 years of development, FLY MACHINE has become a professional manufacturer mainly undertaking construction machinery parts that road Milling Bit, Trenching Bit, Forestry and mulcher teeth, Scarifier Blade Tools, Foundation Drilling bit, Mining and Tunneling bit, etc. are our main products. The above is related information about foundation drilling welding, if you are interested in Flat teeth for foundation drilling, weld-on teeth for boring holes, heavy drilling bit for foundation, you can contact us, our website is www.cuttingpicks.com.
